|
|
 |
GENERATOR
Wind powered Generators: Information, benefits and disadvantages. A renewable green energy system for home, business or community
 |
Wind Power Generators
Today's wind power generators are efficient commercial, farm, and home energy systems in contrast to the wind mills of the past. You can use a combination photovoltaic power and home wind energy system to increase your electric capacity for grid tie and off the grid.. With today's technology, your electric wind mills can power a water pump or provide residential wind power to supplement your overall home power needs. There are many accessories such as inverters and charge controllers for your commercial or home wind power generators.
|
 |
Boiled down to its simplest principles, a wind generator´s rotating blades convert the wind´s kinetic energy into rotational momentum in a shaft. The rotating shaft turns an alternator, which makes electricity. This electricity is transmitted through wiring down the tower to its end use.
The blades use engineered airfoils, matched to the alternator, that capture the wind´s energy. Most modern wind generators use three blades, the best compromise between the highest efficiency possible (one blade) and the balance that comes with multiple blades. Together, the blades and the hub they are attached to are termed the rotor, which is the collector of the system, intercepting winds that pass by. Most turbines on the market today are upwind machines—their blades are on the windward side of the tower. A few downwind machines are available, but neither configuration has a clear performance advantage over the other.
In most small-scale designs, the rotor is connected directly to the shaft of a permanent magnet alternator, which creates wild, three-phase AC. Wild, three-phase electricity means that the voltage and frequency vary continuously with the wind speed. They are not fixed like the 60 Hz, 120 VAC electricity coming out of common household outlets. The wild output is rectified to DC to either charge batteries or feed a grid-synchronous inverter. In most designs (up to 15 KW in peak capacity), the rotor is usually connected directly to the alternator, which eliminates the additional maintenance of gears. In systems 20 KW and larger, as well as some smaller wind systems (like the Endurance, Tulipo, or Aircon), a gearbox is used to increase alternator speed from a slower turning rotor.
The blades must turn to face the wind, so a yaw bearing is needed, allowing the wind turbine to track the winds as they shift direction. The tail directs the rotor into the wind. Some sort of governing system limits the rotor rpm as well as generator output to protect the turbine from high winds. A shutdown mechanism is also useful to stop the machine when necessary, such as during an extreme storm, when you do not need the energy, or when you want to service the system
|
|